RV Water Filter | 0.02 Micron Ultrafiltration | Bacteria & Chemical Removal

Premium 4 GPM Ultrafiltration RV Water Filter System - Clean, Safe Water Anywhere You Travel

Ultimate Protection: Advanced 0.02 micron ultrafiltration removes 99.9% of harmful contaminants including bacteria, viruses, microplastics, and sediment, transforming questionable campground water into clean, safe drinking water for your entire RV.

The Premiere ultrafiltration system is the ultimate water purification solution designed specifically for RVs, campers, and motorhomes. This powerful inline system installs before water enters your vehicle, providing comprehensive protection and peace of mind during your adventures.

Superior Filtration Technology

Our revolutionary dual-stage filtration system combines a 0.02 micron ultrafiltration membrane with a 5-micron activated carbon block filter. This powerful combination removes microscopic threats including bacteria, viruses, protozoa, and microplastics while also eliminating chemicals like chlorine, pesticides, chemicals, and trihalomethane compounds that affect taste and odor.

Exceptional Performance & Convenience

• High-capacity design supports flow rates up to 4 GPM (water pressure dependent)
• No electricity or pump required - operates efficiently even at low pressure
• Exclusive backflush feature allows easy membrane cleaning, extending filter life
• Maintains essential minerals for better taste and health benefits
• Industry-leading 3-5 year membrane life (compared to months for standard filters)
• Simple annual carbon filter replacement

Why Premiere Ultrafiltration?

Don't compromise on water quality during your travels. Whether you're at established campgrounds or more remote locations with questionable water sources, our system provides reliable protection against waterborne contaminants while ensuring your water tastes great.

Invest in the Premiere ultrafiltration system today and enjoy worry-free, clean water anywhere your adventures take you!

Dual-Stage Advanced Filtration Technology

Stage 1: Ultrafiltration Membrane (0.02 Micron)

• Superior Microscopic Protection: Eliminates 99.9% of harmful contaminants including bacteria, viruses, cysts, microplastics, and sediment down to 0.02 microns
• Innovative Backflush System: Simply turn the valve to clean and restore the membrane in seconds - extends life up to 5 years
• Eco-Conscious Design: Zero chemicals or wastewater produced during filtration or cleaning
• Reliable Performance: Supports flow rates up to 4 GPM using your existing water pressure - no electricity needed

Membrane Model: PS-500-MEM (Replace every 3-5 years)

Stage 2: Premium Carbon Filtration (Two Options Available)

Standard Carbon Filter

• Chemical Reduction: Effectively removes chlorine, chloramine, VOCs, pesticides, and industrial contaminants
• High-Performance Filtration: Dense activated carbon structure captures a wide range of chemical compounds
• Sustainable Materials: Filter media is made from renewable, high-density coconut shell carbon for maximum efficiency

Model: PS-4510CB (Replace annually)

Carbon Filter with Scale Inhibitor

• All Standard Benefits: Includes all chemical reduction and taste improvement features
• Advanced Protection: Prevents limescale buildup in pipes and appliances
• Corrosion Defense: Siliphos technology creates a protective barrier inside your RV's plumbing system

Model: BG-10CS (Replace annually)

System Advantages

• Unmatched Value: Long-lasting filters dramatically reduce maintenance costs compared to standard RV filters
• Simplified Maintenance: Clean the UF membrane in seconds with a simple valve turn - no disassembly required
• Travel-Ready Operation: Functions perfectly without electricity, pumps, or special equipment
• RV-Optimized Design: Compact footprint perfect for RVs, campers, trailers, and tiny homes
• Complete Protection: Transforms questionable campground water into clean, safe drinking water anywhere you travel

Transform your RV water experience with the Premiere PS-500-RV system - where advanced filtration technology meets practical design for the ultimate peace of mind on the road!

• Size: 20″ W X 14″ H X 11″ D
• Flow rate: up to 4 gallons per minute (depends on your incoming water pressure)
• This system has 3 ports that require connection: inlet, outlet, and membrane backflush. For the flush port (membrane backflush), this system should be installed near a drain, bucket, or waste water outlet to send the backflush water
• Plumbing connection size: 1″

Special notes:

1. Total dissolved solids (TDS): This product is NOT recommended for water with a high total dissolved solids (TDS) level (i.e.,over 500 ppm), or if you wish to reduce/remove TDS. The ultrafiltration process preserves healthful minerals (minerals make up TDS). If you have a TDS level above 500 ppm or wish to reduce/remove your TDS level, please keep in mind that only reverse osmosis or deionization will reduce and remove TDS in water. Read about total dissolved solids.
2. Taste: If you want to achieve “tasteless” water that is free from minerals and TDS, (i.e., how some bottled water tastes – or doesn’t taste, rather) you will want to consider reverse osmosis because ultrafiltration preserves healthful minerals and doesn't reduce or remove TDS, which can contribute to how your water will taste.
3. Membrane life may vary based on water quality, water usage, flow rate, inlet line pressure, how well it's been maintained and flushed, etc. which may require more frequent replacement.
4. Flow rate may vary depending on water pressure, water temperature, local water conditions, and how full the membrane is.
5. Additional parts may be need: Since plumbing configurations can vary, you may need to supply additional parts/adaptors in order to connect this system to your plumbing.
6. Water softeners: Install this system before any water softeners that use sodium (salt). This is because some water softeners make hard water “soft” by replacing the calcium and magnesium with sodium. These high levels of sodium break down the membrane so therefore this system should be installed before any softener.
7. Clean water pressure storage tank: You may want to consider a pressure storage tank which installs on the outlet side of the system. A pressure storage tank stores clean water to flush the membrane with filtered water; without a pressure storage tank the membrane is flushed with unfiltered water which could shorten the membrane lifespan. A pressure storage tank is highly recommended if you have colloidal issues and/or high turbidity (high NTU or SDI level). A pressure storage tank is not included (we don’t sell them), and they’re available at most plumbing or well water supply stores (get a 10 or more gallon one). If you already have a pressure storage tank that you plan to use, please ensure it has previously only been used as a clean water pressure storage tank and that it is completely clean and sterilized.

This water filter system can be installed by a local, licensed plumber, or by handy homeowners. For detailed instructions, please refer to the installation instructions. Contact us if you have any questions.

PS-500 2-Stage Installation Instructions

The ultrafiltration membrane should be flushed on a regular basis to ensure longest membrane life. To flush the membrane, simply turn the valve and leave open for up to 15 seconds to fully flush the membrane. A small amount of water will be expelled while the valve is open – it may be helpful to have a tub or bucket to capture this water.

How often you flush the membrane will depend on your water conditions and water usage. Flush the ultrafiltration membrane at least once per month; some users may find they need to flush it a few times a month, weekly, or even daily.

In general, you will know it is time to flush the membrane when there is a consistent, noticeable drop in water pressure. At minimum, it still should be flushed at least once per month even if you do not notice any drop in water pressure.

The ultrafiltration membrane (PS-500-MEM) should be replaced once every 3 – 5 years.