Two Stage Whole House Water Filter System for Lead, Chlorine, Sediment

Whole House Water Filter for Lead, PFAS (forever chemicals), Chlorine, Chloramine, Sediment, and more

The Premiere BG-202PB whole house water filter for lead is an excellent point of entry water filter that installs at the main water supply line to treat all the water in your home. It reduces lead, Perfluoroalkyl and Polyfluoroalkyl substances (PFAS – also called “forever chemicals), chlorine, chloramine, VOCs, cysts, sand, rust and sediment. This system includes a 5 micron sediment pre-filter, and a 0.5 micron nominal catalytic activated carbon lead reduction cartridge. Other whole house systems may boast being 3-stage, however our 2-stage system is just as effective and means there are less filters to replace which saves money and time. This filter system provides a high contaminant holding capacity and long filter life. The flow rate is up to 7 gallons per minute (dependent on incoming water flow). The entire unit is mounted on a powder coated frame or bracket (your choice) that is corrosion resistant.

The Premiere BG-202PB is more effective at lead reduction than the iSpring 2-stage and 3-Stage whole house lead reducing water filtration systems (WGB22B-PB and WGB32B-PB) and the rest of the competition because the BG-202PB reduces both soluble and particulate lead – iSpring systems do not reduce particles of lead. Also, the BG-202PB reduces chloramine – other systems including iSpring do not reduce chloramine.

10 Benefits of a Whole House Water Filtration System

1. Cleaner, better tasting water from every faucet, tap, and spigot in your home!
2. No more chlorine taste or smell.
3. Healthier baths and showers, and better skin.
4. Get it and forget it – whole house water filtration systems are very low maintenance.
5. Helps extend the life of your plumbing, fixtures and water-using appliances.
6. Leaves your sink and shower ‘squeaky’ clean.
7. Very cost-efficient- with a whole house water filtration system, you only have to pay attention to a single system which is more economical and convenient.
8. Your clothes stay bright, fresh, and crisp.
9. Multi-stage filtration systems produce water of pristine quality.
10. One filter system does all this; no need for a separate filter for your kitchen, bathroom, or showerhead.

Stage 1: 5 micron sediment filter OR 5 micron sediment filter with scale inhibitor

• High dirt holding capacity
• Longer filter life than other grooved sediment filters on the market
• The grooved design increases surface area, extends the water filter cartridge life, and increases water filtration efficiency
• Deep ridges are industrial grade construction that withstand stressful conditions
• The rigid construction helps to eliminate sediment “unloading” that often happens due to variations in water pressure
• Large-diameter (4.5″), 5 micron sediment filter that is an effective method for reducing turbidity in water
• Removes sediment, dirt, rust, and other particulate matter as small as 5 microns that are commonly found in drinking water
• Scale inhibitor option: 5 micron sediment pre-filter with scale inhibitor protects plumbing connections, pipes, and appliances. If you select the option for a scale inhibitor filter, you will receive a BG-20SC cartridge instead of the BG-20SED

Stage 2: 0.5 micron catalytic activated carbon block water filter for lead reduction

• 0.5 micron nominal filtration reduces lead, PFAS, chlorine, chloramine, VOCs, cysts, sand, rust and sediment
• High dirt holding capacity
• High adsorptive capacity and efficiency
• Coconut shell activated catalytic carbon is an eco-friendly and renewable resource for water purification. It also has a higher contaminant removal than a granular activated carbon filter (GAC filter) which means better tasting water too
• Estimated capacity: 96%+ reduction of 8.5 pH lead; 95%+ reduction of VOC; 90%+ reduction in chlorine at 2 ppm; 83%+ reduction in chloramine at 3ppm

Other Features and Benefits:

• Heavy-duty, food grade plastic water filter housing suitable for drinking water filters
• Screw-off lid with wrench for easy changing of the drop-in water filter cartridge
• Built in pressure release valve (PRV) to release pressure before changing filters
• 1″ port which allows for a flow rate of up to 7 gallons per minute
• Powder coated, rust-resistant bracket. Pre-drilled holes in the bracket allow for easy mounting

• Flow rate: 7 gallons per minute (dependent on incoming water flow)
• Connection size: 1″ FPT
• Size: 28″ high X 20″ wide X 11″ deep

This water filter system can be installed by a local licensed plumbing professional or by handy homeowners. For detailed guidance, please refer to the installation instructions. Contact us if you have any questions.

BG-202PB Installation Instructions

BG-202PB Installation Diagram