Multi-Cartridge Stainless Steel Boiler Treatment System With Four Premiere AMF-SDR530 30″ Sediment Filters with Scale inhibitor.
The Premiere SS430 is a heavy-duty stainless steel multi-cartridge vessel containing four (4) 30″ sediment filters with scale inhibitor. With a high flow rate of up to 84 gallons per minute, this system is ideal for industrial and commercial applications including boilers. This included filter cartridges contain Siliphos ® scale control product which prevents scale and stops corrosion. It works by forming a thin protective layer on the metal surface to inhibit the deposition of scale and corrosion.
This system is for hot or cold applications, and can be used for both chlorinated (municipal) and non-chlorinated (well water) systems. Don’t risk failure or flood damage with a low-cost, plastic water filter housing that could burst. This system is high quality 304 stainless steel construction that provides maximum durability and is resilient to corrosive substances and chemicals.
SS430 Key Features & Benefits:
Heavy-duty, 304 stainless steel
Electropolished on the inside and out – see additional benefits below
Entire housing is machine welded
Legs included at no extra cost
Band clamp design for easy & fast cartridge change outs, secure sealing, and safe operation
Two built-in gauge ports on inlet and outlet – easily read incoming and outgoing pressure to know when it’s time to change filters
One 3/4″ MPT drain opening at bottom of housing for easy flushing and cleaning
Delivers an impressive, unrestricted flow rate of up to up to 84 gallons per minute which is a sufficient supply of filtered water for large homes and commercial applications – especially boilers and hot water heating systems
Can hold four (4) 2.5″ D x 40″ L double open-ended (DOE) style filter cartridges – 4 x AMF-SDR530 scale inhibitor cartridges are included
Knife edge seals eliminate bypass on DOE cartridges
The competition charges for premium features like legs and an electropolished finish – legs and electropolished finish come standard with this system at no additional cost.
Provides tremendous capacity to remove and/or reduce sediment and scale that may be present in your water
Significantly reduces hardness build up due to minerals present in the water supply
For hot or cold water use
Can be used for chlorinated (municipal) or non-chlorinated (well water) systems
2″ FNPT connections assist in maximum flow rate with minimum pressure drop
NSF® certified components. NSF International is one of the most respected independent certification organizations, which rigorously tests products to comply with all standard requirements
Benefits of AMF-SDR530 scale inhibitor cartridges
Premium 5 micron water filter cartridge with scale inhibitor to protect your heat exchanger and avoid tank failure
Siliphos ® scale control product prevents scale and stops corrosion. It works by forming a thin protective layer on the metal surface to inhibit the deposition of scale and corrosion on your tankless water heater
Rigid construction with 102 deep grooves. The deep grooves increase surface area, enhance contaminant holding capacity, and promote fuller utilization of the depth-matrix for fewer cartridge change outs
Reduces unloading at high differential pressure
Made without adhesives, binders, surfactants or lubricants for compatibility in a wide range of applications and operating conditions
The differences between our tankless water heater filter cartridge and other suppliers is the 5 micron absolute rating, deep grooves, and use of the most effective scale control formula. Don’t settle for inferior cartridges with no track record!
Benefits of electropolished 304 stainless steel
Maximum tarnish and corrosion resistance
Surface is easy to clean – reduced cleaning time by more than 50 percent!
Less bacteria growth
Bright, highly reflective finish
Substances are less likely to adhere to the surface (cake-on)
Less friction and surface drag
The 304 stainless steel housing provides maximum durability and is resilient to corrosive substances and chemicals. Enjoy peace of mind against the risk of failure and flood damage. A stainless steel water filter housing is the preferred choice for many applications due to its durability and extended life compared to plastic housings. Don’t be tricked by fiberglass, resin, or plastic housings that may only have a “stainless steel wrapper” which is for looks and doesn’t provide any structural integrity. Fiberglass, resin, and plastic housings may also leach into your water.
Port connections (In/Out): 2″ FNPT
Drain connections: 3/4″ MNPT
Gauge port connections: 1/4″ FNPT
Maximum flow rate: 84 gallons per minute (cartridge dependent)
Number of cartridges: 4 x 30″ cartridges (includes four Premiere AMF-SDR530 cartridges)
Download SS-740 Spec Sheet
What is boiler scale?
Boiler scale is a hard, mineral coating that can collect on the water-side of boiler tubes. Scale is a problem for boilers because it acts as a barrier to heat transfer which increases energy consumption and costs. Scale also causes boiler tube corrosion and failure (boiler tubes are very expensive to replace!).
Boiler scale removal and scale inhibitor
The best and easiest way to maintain your boiler is to have a boiler water filter with scale inhibitor.
The SS740 stainless steel boiler water treatment system with corrosion and scale inhibitor filters will remove existing scale deposits, prevent scale, and stop corrosion. Scale inhibitor works by forming a thin protective layer on the metal surface to prevent the deposition of scale and corrosion.