Alkaline Water Filter Replacement Kit for the PS-PH200 Ultrafiltration/Alkaline System

Alkaline Water Filter Replacement Kit for the Premiere Ultrafiltration + Alkaline System (PS-PH200)

This alkaline water filter replacement kit contains two (2) drop-in style cartridges which are easily installed in the Premiere PS-PH200 ultrafiltration system. The PS-PH200-RC filter kit reduces harmful contaminants and alkalizes the water. The high performance 0.50 micron carbon filter reduces lead, chlorine, chloramine, volatile organic chemicals (VOCs), pharmaceuticals, pesticides, trihalomethanes (THMs), methyl tertiary butyl ether (MTBE), and more. The alkaline cartridge adds back essential and beneficial elements such as ionized calcium, magnesium, sodium, and potassium. It increases the pH to 8.5 – 10 and increases the negative oxidation reduction potential (ORP).

• Increases pH to 8.5 – 10
• Increases the negative oxidation reduction potential (antioxidant level)
• Increases healthful minerals in drinking water. Adds calcium, magnesium, sodium, and potassium ions.
• Reduces lead, chlorine, chloramine, VOCs, cysts, sand, rust, sediment, and more
• Coconut shell carbon block cartridge is 0.5 micron nominal filtration with high chemical adsorption capacity
• Tremendous surface area that allows for the greatest use of the carbon’s absorptive capacity. Higher surface area extends the life of the cartridge, lowering the need for frequent filter change
• Designed to be used in most standard-size housings

• Flow rate: 2 gallons per minute
• Filter life: 2,000 gallons or one year (whichever comes first)
• Size: 2.75″ D X 9.75″ L

These water filters will fit any standard size 10″ water filter housing including brands such as Pentek, 3M Aqua-Pure, GE, or Watts. The PS-PH200-RC contains one of our AMF-CBCPB2 cartridges and one alkaline GAC coconut shell carbon block cartridge.

How to replace the filter cartridges in the Premiere PS-PH200 / PS-PURUF / PS-UFPOU1 ultrafiltration system:

1. Turn Off Water - Close the feed water valve.
2. Release Pressure - Open the connected faucet to the drain system.
3. Remove Old Filters - Keep a towel nearby for spills. Unscrew the filter housings (use a wrench if needed), then remove and dispose of the old filters.
4. Install New Filters - Insert the new filters, ensuring proper alignment. Securely reattach the housings.
5. Restore Water - Verify all connections are tight. Slowly open the feed water valve and run water for 5–10 minutes or until all air in the line is cleared.