Ultrafiltration + Alkaline Water Filter System

Premiere Ultrafiltration + Alkaline Water Filter System

The Premiere PS-PH200 ultrafiltration + alkaline water filter system produces clean, alkaline water on demand. This system removes tiny particles as small as 0.02 micron while maintaining and adding beneficial minerals back into the water. It increases the pH to 8.5 – 10 and increases the negative oxidation reduction potential (ORP). This system alkalizes water by adding calcium, magnesium, sodium, and potassium ions. The PS-PH200 removes microplastics, sediment, bacteria, cysts, viruses, Giardia, E. coli, Cryptosporidium, and other particulate matter. It also reduces chlorine, fluoride, chemicals, and heavy metals. There is no storage tank which means it’s compact and there is no bacteria growth in the system. The PS-PH200 is completely efficient compared to reverse osmosis systems; with ultrafiltration, no water is lost to drain during purification.

• Increases pH to 8.5 – 10.
• Increases the negative oxidation reduction potential (antioxidant level). Makes water more easily absorbed into the body.
• Preserves and increases healthful minerals in drinking water. The PS-PH200 ultrafiltration system leaves healthful minerals in the water. Alkaline filter adds calcium, magnesium, sodium, and potassium ions.
• No storage tank. The PS-PH200 is compact and delivers healthy water on demand (up to 1.5 GPM). More significantly, it is common for bacteria to grow inside RO storage tanks (they literally become “incubators” for bacteria) so ditching the storage tank means you’re not drinking harmful bacteria. The PS-PH200 is therefore superior to reverse osmosis + alkaline systems which requires a storage tank
• The PS-PH200’s 0.02 micron UF membrane filters out solids / particulates as small as 0.02 micron including: microplastics, bacteria, protozoa, cysts, viruses, algae, dirt, mold, silt, colloidal silica, clay, iron, sand, lead particulate, and more.
• Enjoy peace of mind that the PS-PH200’s 0.02 micron membrane removes bacteria (up to 99.9999+%), viruses (up to 99.99+%), and giardia & cryptosporidium (up to 99.95+%) from your drinking water. This system provides more than a 5-log reduction of bacteria, cysts, viruses, and turbidity. In other words, bacteria, cysts, viruses, and turbidity have been reduced 100,000-fold.
• The post-filter housings contain an alkaline filter cartridge and a 0.5 micron carbon filter cartridge
• Zero waste water during the purification process. A conventional reverse osmosis system may waste 3 – 25 gallons of water to produce one gallon of reverse osmosis water. This system is revolutionary in that is does not waste water in the production of purified water.
• Ultrafiltration system is the perfect product for California water use restrictions
• Works well at low water pressure
• Easily takes the place of outdated reverse osmosis (RO) and Ultra Violet (UV) water purification systems
• Change the water filters quickly, easily, and less often. Our high capacity filters only need to be changed after 2,000 gallons or once per year (whichever comes first). Other filters have far less capacity and need to be changed the filters twice per year which is time-consuming and costly.
• Back flushing membrane ensures longer water membrane life. When a membrane undergoes a backward flush, it’s pores are flushed inside out to clean it of contaminants. Innovative technology lets you flush (clean) the membrane whenever it gets full of contaminants. You can tell when it’s time to flush the membrane because there will be a drop in water pressure. Simply turn the valve to flush the membrane (please note that a small amount of water will be discharged while the valve is open). Membrane should be replaced every 2-3 years.
• Easy plug-in installation if replacing an existing reverse osmosis system
• Versatile filtration system – if you don’t want alkaline water any more, you can simply replace the alkaline filter with a carbon block filter.

• Size: 15.25" H X 15" W X 6" D
• Flow rate: 1 - 1.5 gallons per minute (depends on your incoming water pressure)
• Operating pressure: 35 psi - 85 psi

Special notes:

1. Total dissolved solids (TDS): This product is NOT recommended for water with a high TDS level (over 500 ppm) or if you wish to reduce/remove TDS. The ultrafiltration process preserves healthful minerals (minerals make up TDS). If you have a TDS level above 500 ppm or wish to reduce/remove your TDS level, please keep in mind that only reverse osmosis and deionization will reduce and remove TDS in water. Here's a reverse osmosis drinking water system. Read about total dissolved solids.
2. Taste: If you want to achieve “tasteless” water that is free from minerals and TDS, (i.e., how some bottled water tastes – or doesn’t taste, rather) you will want to consider reverse osmosis because ultrafiltration preserves healthful minerals and doesn't reduce or remove TDS, which can contribute to how your water will taste.
3. Water softeners: Do not use the PS-PH200 with water softeners that use sodium (salt). This is because some water softeners make hard water “soft” by replacing the calcium and magnesium with sodium. These high levels of sodium break down the membrane.
4. Filter life: The life of the UF membrane and filter cartridges may vary according to water quality, water usage, flow rate, and inlet line pressure which may require more frequent membrane flushing and replacement of the membrane and cartridges.
5. Flow rate: May vary depending on water pressure, water temperature, local water conditions, and how full the membrane is.
6. Additional parts: Since plumbing configurations can vary, you may need to supply additional parts or adaptors in order to connect this system to your plumbing.

This water filter system can be installed by a local, licensed plumber, or by individuals with DIY skills. If you're replacing an existing under sink water filtration system such as a reverse osmosis, it makes installation even easier. For detailed instructions, please refer to the installation instructions. Contact us if you have any questions.

PS-PH200 Installation Instructions

The ultrafiltration membrane should be flushed on a regular basis to ensure longest membrane life. To flush the membrane, simply turn the valve and leave open for up to 15 seconds to fully flush the membrane. A small amount of water will go to drain while the valve is open.

How often you flush the membrane will depend on your water conditions and water usage. Flush the ultrafiltration membrane at least once per month; some users may find they need to flush it a few times a month, weekly, or even daily.

In general, you will know it is time to flush the membrane when there is a consistent, noticeable drop in water pressure. At minimum, it still should be flushed at least once per month even if you do not notice any drop in water pressure.

The ultrafiltration membrane (PS-PURUF-MEM) should be replaced once every 2-3 years, and the activated carbon block replacement water filters (PS-PURUF-RC) should be replaced once per year, or after 2,000 gallons (whichever comes first).