Excellent Pre-Treatment System for Commercial Reverse Osmosis Systems. Introducing the PS-2000PRE with 0.02 micron ultrafiltration to help protect your commercial RO. The scale inhibitor filter in this system makes it a great alternative to a water softener as pre-treatment for your commercial RO.
The Premiere PS-2000PRE is a powerful water filter system recommended to treat incoming water before it enters a commercial reverse osmosis system. By treating the water before it enters an RO system, it prolongs the RO membrane life and filters, and can improve efficiency of an RO system. The membranes and filters in a commercial RO system can be expensive and time-consuming to replace, so filtering water with the PS-2000PRE can provide significant cost-savings and benefits. Not only does this system remove particles as small as 0.02 micron, it has scale inhibitor which means if the incoming water is hard, it won’t adhere to the metal surfaces in a commercial RO and means less wear and tear on the RO system. Then the RO membrane in your existing system will filter out the scale inhibitor, producing clean, pure water for you.
It has a 0.02 micron ultrafiltration (UF) membrane which removes particulates and solids like microplastics, bacteria, viruses, protozoa, and colloidal materials on a microscopic level. The 5 micron sediment filter removes solid materials found in your water like dirt, sand, sediment, and other particulate matter. It has a high contaminant holding capacity. If your incoming water has a lot of debris, this sediment filter helps the RO unit work more efficiently and helps prolong the lifespan of a commercial RO system.
The PS-2000PRE is an excellent water pre-treatment system because it operates smoothly at low water pressure, and does not require electricity to operate. The PS-2000PRE ultrafiltration membrane features innovative technology which lets you flush (clean) the membrane whenever it gets full of contaminants. The long-lasting membrane means you are spending less time and money changing water filters.
Stage 1: 5 Micron Grooved Sediment Filter with scale inhibitor – removes suspended particles in your water that can clog the UF membrane quicker and shorten the life-span of the membrane
- Siliphos ® scale inhibitor product prevents scale and stops corrosion. It works by forming a thin protective layer on the metal surface to inhibit the deposition of scale and corrosion. The scale inhibitor will pass through this system to provide benefits of
- Premium, high-flow 5 micron sediment water filter (BG-20SC) that removes sediment, dirt, iron, rust, and other particulate matter
- Ideal for water – especially well water – which has a high level of suspended particulates
- Sediment particles such as dust, hair, insects, pollen, fibers, and other organic materials can cause the water to become cloudy (turbid). This filter is an effective method for reducing turbidity in water
- The grooved design increases surface area, extends the water filter cartridge life, and increases water filtration efficiency
- Deep ridges are industrial grade construction that withstand stressful condition
- The rigid construction helps to eliminate sediment “unloading” that often happens due to variations in water pressure
- High dirt holding capacity
Stage 2: 0.02 Micron Ultrafiltration Membrane Filter – removes solids and particulates
- Long membrane life – save time and money by replacing filters significantly less often without any drop in water quality
- Breakthrough system lets you easily flush (clean) the membrane of collected contaminants. Simply turn a little valve on the unit to clear the UF membrane of contaminants. The Premiere PS-2000PRE is truly unique in this respect!
- 0.02 micron UF membrane – Filters out solids / particulates as small as 0.02 micron including: microplastics, bacteria, protozoa, cysts, viruses, algae, dirt, mold, silt, colloidal silica, clay, iron, sand, lead particulate, and more.
- Very high effectiveness in removing bacteria (over 99.9999%), viruses (over 99.99%), and protozoa like giardia & cryptosporidium (over 99.95%) from your water
- Eliminates colloidal particulates, sediment, sand, silt, colloidal silica, and other solids / particulates larger than 0.02 micron
- The UF membrane also removes particulate lead
- The membrane has four o-rings to ensure a seal so that bacteria and other contaminants do not get back into your filtered water
- Zero waste water during the ultrafiltration process
- Continuous, high flow 8 gallon per minute flow rate
- Constant product quality regardless the quality of the incoming water
- The membrane-housing is efficiently designed to provide easy backflushing. (When a membrane undergoes a backward flush, it’s pores are flushed inside out to clean it of contaminants)
- Membrane should be back flushed on a regular basis to ensure longest membrane life (3 – 5 years). To flush the membrane, simply turn the valve and leave open for up to 15 seconds to fully flush the membrane. A small amount of water will go to drain while the valve is open
- Replacement ultrafiltration membrane filter is the PS-1000RC – replace once every 3 – 5 years
If the incoming water has colloidal issues and/or high turbidity (high NTU or SDI level), it’s highly recommended to install a pressure storage tank (not included) on the outlet side of this system. A pressure storage tank stores clean water to flush the membrane with filtered water.
PS-2000PRE Applications:
The Premiere PS-2000PRE can be used in a variety of applications including:
- Pre-treatment / pre-filter for commercial reverse osmosis systems producing thousands of gallons per day
- Pre-treatment / pre-filter for light commercial RO systems producing hundreds of gallons per day
- Pre-treatment / pre-filter for under sink RO systems
- Food service beverages & ice
- Convenience store beverages & ice
- Beverage process filtration
- Well water
- Water at risk for bacteria contamination
- Whole house
- Schools
- Hospitals
- Hotels
- Beer brewing and much more