Fluoride & Heavy Metals Reduction Filter Kit for the PS-PURUF Ultrafiltration System (Bone Char + Carbon Combo)

Fluoride Reduction Replacement Water Filter Kit for the Premiere Ultrafiltration System (PS-PURUF or PS-UFPOU1)

This replacement water filter kit contains one (1) 0.5 micron, activated catalytic carbon block cartridges and one (1) fluoride reduction filter cartridge. They are drop-in style cartridges which are easily installed in the Premiere PS-PURUF ultrafiltration system (also known as the PS-UFPOU1). The PS-PURUF-FRC filter kit reduces harmful contaminants including lead, chlorine, chloramine, VOCs, cysts, sand, rust, fluoride, and sediment. It improves the appearance and taste of drinking water. Coconut shell catalytic activated carbon technology is an eco-friendly and renewable resource for water purification.

The standard replacement kit for the PS-PURUF ultrafiltration system (no fluoride reduction) is the PS-PURUF-RC available here. The ultrafiltration membrane, sold separately, should be replaced once every 2-3 years (PS-PURUF-MEM).

• Activated carbon block filter reduces lead, parasites (cryptosporidium & giardia), cloudiness (turbidity), sediment, offensive taste/odor, chlorine, chloramine, THMs (trihalomethanes), VOCs (volatile organic chemicals), asbestos, and more
• Bone char carbon filter is highly effective for reducing fluoride, arsenic, chlorine, chloramine, lead, cadmium, mercury, iron, manganese, copper, zinc, aluminum, nickel, radio-nuclides, radioactive isotopes, fertilizers, uranium, radium, pesticides and herbicides from water
• High chemical adsorption capacity
• Tremendous surface area that allows for the greatest use of the carbon’s absorptive capacity. Higher surface area extends the life of the cartridge, lowering the need for frequent filter change
• Catalytic carbon provides better contaminant reduction than a granular activated carbon filters (GAC filter)
• Excellent for final polishing of drinking water
• Designed to be used in most standard-size housings
• Made in USA

• Flow rate: 2 gallons per minute
• Capacity: 2,000 gallons
• Size: 2.75″ D X 9.75″ L

How to replace the filter cartridges in the Premiere PS-PURUF / PS-UFPOU1 / PS-PH200 ultrafiltration system:

1. Turn Off Water - Close the feed water valve.
2. Release Pressure - Open the connected faucet to the drain system.
3. Remove Old Filters - Keep a towel nearby for spills. Unscrew the filter housings (use a wrench if needed), then remove and dispose of the old filters.
4. Install New Filters - Insert the new filters, ensuring proper alignment. Securely reattach the housings.
5. Restore Water - Verify all connections are tight. Slowly open the feed water valve and run water for 5–10 minutes or until all air in the line is cleared.